• 首页关于本刊投稿须知期刊订阅编委会期刊合作查询检索English

查看全文   查看HTML全文 下载PDF阅读器  

  李艳永,王范霞,乌尼尔,唐明帅.西昆仑东段震源机制和构造应力场特征[J].震灾防御技术,2020,15(4):802-810, DOI:10.11899/zzfy20200414.

西昆仑东段震源机制和构造应力场特征
摘要:    本文利用新疆测震台网记录的宽频带波形数据,采用CAP方法反演西昆仑东段2010年1月—2018年12月MS≥3.0地震震源机制,并结合研究区早期的震源机制数据分区反演构造应力场。结果表明:研究区地震破裂类型以逆断型和走滑型为主,其次为正断型,过渡型最少;震源机制节面在NWW向存在明显优势分布且倾角较陡,压应力P轴在NNE向有优势分布且倾角较小,张应力T轴在NW-SE向有优势分布且倾角较小,说明研究区总体上主要以NNE向的水平挤压和NW-SE向水平拉张作用为主;西南区域应力结构为走滑型,东北区域应力结构为逆断型,最大主应力轴方位的最优解都呈NNE向,但西南区域更偏东,东北区域水平作用更明显。东北区域的应力形因子R值较小,体现该区域的物质隆升相对于西南区域物质隆升分量大。
作者单位
李艳永 新疆维吾尔自治区地震局, 乌鲁木齐 830011 
王范霞 新疆维吾尔自治区地震局, 乌鲁木齐 830011 
乌尼尔 新疆维吾尔自治区地震局, 乌鲁木齐 830011 
唐明帅 新疆维吾尔自治区地震局, 乌鲁木齐 830011 
关  键  词:西昆仑  震源机制  应力场  CAP  MSATSI软件
DOI:10.11899/zzfy20200414
基金项目:国家自然科学基金项目(41674063、41574088);地震科技星火计划项目(XH18055);新疆地震科学基金(201903、201906)
收稿日期:2019-10-09
作者简介:李艳永,男,生于1984年。高级工程师。主要从事地震监测工作。E-mail:370451652@qq.com
通讯作者:
The Focal Mechanism and Stress Field Inversion in the Eastern Section of West Kunlun
Abstract:      In this paper, based on the broadband waveform data recorded by Xinjiang Seismic Network, the focal mechanism of MS ≥ 3.0 earthquake from January 2010 to December 2018 are inverted by CAP method in the eastern section of West Kunlun. Combined with the focal mechanism data in the early stage, the stress field in the study area is inversed. The results show that the seismic rupture types are mainly thrust type and strike-slip type, followed by normal fault type, and the transition type is the least in the study area. Nodal plane of focal mechanism is near NWW, the inclination angle is steep. P axis is near NNE, and the inclination angle is small.T axis is near NW-SE, the inclination angle is small. It indicates that the stress field of study area is mainly under action of NNE horizontal compression and the NW-SE horizontal tensional; The inversion results show that the stress structure in the southwest and northeast regions is quite different, the stress structure in the southwest region is strike-slip type, the stress structure in the northeast region is thrust type. The optimum solution of the maximum principal stress σ1 are NNE direction in southwest region and northeast region, but the southwest region is more east, and the horizontal effect in the northeast region is more obvious. The stress shape ratio R indicates that the material uplift in the southwest region is smaller than that in the northeast region.
Keywords:  West Kunlun  Focal mechanism  Stress field  CAP  MSATSI
关闭